Info
This document is part of an original submission for the RP2350 Hacking Challenge.
For more detailed and up-to-date content, refer to “Laser Fault Injection on a Budget: RP2350 Edition”.
Electronic Schematics & Interactive Renders
This page contains schematics of the custom electronic boards used in this project.
Interactive 2D renders of the boards are also available.
Main “Backside” Carrier Board
“Backside” I/O Board
Laser Pulser
Warning
Components R5, L2, and C8-10 are used to tune the current pulse shape flowing through the laser diode. The values of these components had to be fine-tuned.
Successful fault injection was not reliably observed with the values provided in this schematic. Refer to the Laser Driver Board Page for details.
Last update: November 24, 2024